AVG-UHD4K-88
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none
Command
Function
Feedback
Example
System Commands
/%Lock;
Lock the front panel buttons.
System Locked!
/%Unlock;
Unlock the front panel buttons.
System Unlock!
/^Version;
Query the firmware version
VX.X.X
/:MessageOff;
Turn off command feedback from
the com port. It will only show
commands like “SWITCH OK!”.
/:MessageOff;
/:MessageOn;
Turn on command feedback from
the com port.
/:MessageOn;
/:FeedbackON;
Enable command feedback on
LCD monitor on the front panel
(default).
/:FeedbackON;
/:FeedbackOFF;
Disable command feedback on
LCD monitor on the front panel
(default).
/:FeedbackOFF;
Operation Commands
Undo.
Cancel the previous operation.
Undo Ok!
Demo.
Switch to the “demo” mode,
convert input and output in turn
like 1B1, 1B2, …8B3,4B4, 1B1…
and so on.The switching interval is
2 seconds.
Switch to normal mode by
pressing any front panel button or
sending any other command
Demo Mode
[x]All.
Transfer signal from input x to all
outputs
1 To All.
All#.
Transfer all inputs to
corresponding outputs,like 1->1, 2-
>2…
All Through.
[x]#.
Transfer signal from input x to
output x.
1 Through.
All@.
Switch on all outputs.
All Open.
[x]@.
Switch on output x.
1 Open.
All$.
Switch off all outputs, but except
coaxial outputs for digital audio.
All Closed.
