AVG-UHD4K-88
Program Custom EDID data
:
Copy custom EDID data (.bin) to the control device (e.g. a PC) and program the data
into the device by sending the command
EDIDUpgrade[x].
Refer to
4.2.3 RS232 Communication Commands
for more EDID management
commands (with grey background).
5.2.4.2 Via 4-pin EDID DIP switcher
Beside the software managed EDID table, the AVG-UHD4K-88 has a 4-pin EDID
DIP switcher to manage EDID. Select the switches to recall corresponding EDID
data
Embedded EDID data
: 10 sets in total, the chart below illustrate the 10
Embedded EDID data options.
Custom EDID data
: max of 3 sets
The chart below shows switcher status for custom EDID No.12~14.
No.
Switcher Status
EDID information
Embedded EDID data
1
0001
720P 2D 5.1CH
2
0010
720P 3D 5.1CH
3
0011
720P 2D 2CH
4
0100
720P 3D 2CH
5
0101
1080P 3D 5.1CH
6
0110
1080P 2D 5.1CH
7
0111
1080P 3D 2CH
8
1000
1080P 2D 2CH
9
1001
2016P 2D 5.1CH
10
1010
2016P 2D 2CH
Custom EDID data
12
1100
Customizable
13
1101
Customizable
14
1110
Customizable
Note:
1)
EDID information listed in the above chart is factory default data. Embedded EDID
data can be updated by sending the command
UpgradeIntEDID[x].
.
2)
Embedded EDID data can also be recalled via command
EDID/[x]/[y].
.
5.3 TCP/IP Control
5.3.1 Control Modes
TCP/IP default settings: IP is 192.168.0.178, Gateway is 192.168.0.1, and Serial
Port is 8080. IP settings can be changed as needed, Serial Port cannot be changed.
Controlled by a single PC
