AVG-UHD4K-88
Connect a computer to the TCP/IP port of the AVG-UHD4K-88, and set its network
subnet to the same as the default IP of the Unit (192.168.0.178).
Figure 5- 4 Modify the IP of PC
Controlled by PC(s) in LAN
The AVG-UHD4K-88 can be connected with a router to make up a LAN with the
PC(s), this allows it to be able to be controlled in a LAN. When controlling in this
manor, just make sure that the AVG-UHD4K-88’s network subnet is the same as the
routers. Please connect as per the following figure for LAN control.
Figure 5- 5 Connect to LAN
Step1.
Connect the TCP/IP port of the AVG-UHD4K-88 to an Ethernet port of the PC
with twisted pair.
Step2.
Set the PC’s network subnet to the same as the Matrix Switcher. Please
remember the PC’s original network subnet setting.
Step3.
Set the AVG-UHD4K-88’s network subnet to the same as the router.
Step4.
Set the PC’s network subnet to the original setting.
Step5.
Connect the AVG-UHD4K-88 and PC(s) to the router. In the same LAN,
each PC is able to control the AVG-UHD4K-88 asynchronously.
Control is then possible via the TCP/IP communication software.
Same
network
subnet as
the switcher
