AVG-CS4K-88-V2
5.3.4 RS232 Communication Commands
Note
:
1)
Please disconnect all twisted pairs before sending command EDIDUpgrade[X].
2)
In the
above commands, “[”and “]” are symbols for easy reading and do not need
to be typed into the actual operation command.
3)
Please remember to end the commands with the end
symbols “.” and “;”.
4)
Type the command carefully, it is case-sensitive.
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none
Command
Function
Feedback Example
System Commands
/*Type;
Query the models information.
XXXXX
/%Lock;
Lock the front panel buttons on the Matrix.
System Locked!
/%Unlock;
Unlock the front panel buttons on the Matrix.
System Unlock!
/^Version;
Query the version of firmware
VX.X.X
Demo.
Switch to the “demo” mode, switch input and output
in sequence e.g. 1B1, 1B
2, …4B3, 4B4, 1B1… and
so on. The switching interval is 2 seconds.
Demo Mode
AV:01->01
IR:01->01
AV:01->02
IR:01->02
……
AV:08->08
IR:07->07
……
Operation Commands
[x]All.
Route signal from the input channel [x] to all output
channels
X To All. (X=01~08)
All#.
Route all input signals to the corresponding output
channels respectively like 1->1, 2->2
…
All Through.
All$.
Switch off all the output channels.
All Closed.
[x]#.
Route signals from the input channel [x] to the
output channel [x].
X Through. (X=01~08)
[x]$.
Switch off the output channel [x].
X Closed. (X=01~08)
[x]@.
Switch on the output channel [x].
X Open. (X=01~08)
All@.
Switch on all output channels.
All Open.
[x1]V[x2].
Route the AV signal from the input channel [x1] to
one or several output channels ([x2], separate
output channels with comma).
AV: X1-> X2
(X1/X2=01~08)
[x1]B[x2].
Route the AV and IR signal from input channel [x1]
to one or several output channels ([x2], separate
output channels with a comma).
AV: X1-> X2
(X1/X2=01~08)
[x1]R[x2].
Route the IR signal from output [x1] to input [x2].
IR: X1-> X2(X1
、
X2=01~08)
Status[x].
Check the I/O connection status of output [x]
AV: Y-> X
(X=01~08, Y=01~08)
Status.
Query the input channel to each output channel one
by one.
AV: 01->01
… …
AV: 08->08
IR: 01->01
… …
IR: 08->08