AVG-CS4K-88-V2
5. System Operations
5.1 Front Panel Button Control
The Matrix Switcher can be controlled via the front panel. Please follow the basic
programing instructions below:
1) To switch one input to an output:
Example: Input 1 to Output 3
→ Press the INPUT 1 button and then the OUTPUT 3 button.
NOTE:
Default status, on first boot up this matrix assigns the IR outputs to the
corresponding HDMI input, meaning, IR out 1 is directly associated to HDMI
input 1 and so on. When you switch a HDMI input to a different output, the
corresponding IR OUT will be switched synchronously to allow the IR
commands to be sent from the select zone back through the Matrix Switcher
to the source.
2) To switch an input to several outputs:
Example: Switch Input 2 to Output 3, 4 and 5
→ Press INPUT 2 + OUTPUT 3 + OUTPUT 4 + OUTPUT 5
Note:
Indicators of the pressed buttons will blink green for three times if the switch is
performed, then they will turn off. If the switch fails, the LED indicators will turn off
immediately.
