AVG AVI- 366IS2 - IOWA, Инструкция по установке / Руководство по эксплуатации и уходу

Страница: 19 / 27

I N STALLATI ON I N STRUCTI ON S
TOOLS NEEDED TO INSTALL THE RANGE HOOD

Safety gloves and goggles

Electrical drill

Phillips screwdriver

Flathead screwdriver

Hammer

Adjustable wrench

Sheet metal sheers

Needle nose pliers

Scissors (to cut duct tape)

Duct tape

Marker or pencil

Level

Measuring tape
PARTS INCLUDED
Type A
(For sheet rock only)
Length: 1-3/5"
Qty: 4 pcs
DIMENSIONS
Type B
(Connect to type A)
Length: 1-3/10"
Qty: 4 pcs
Type C
(For Ducting Transition)
Length: 1/2"
Qty: 66 pcs
BEFORE INSTALLING THE HOOD

For the most efficient airflow exhaust use a straight run or as few elbows as possible.

Vent unit to the outside only.

At least two people are required for installation

Remove the range hood from the carton packaging and place on a flat surface for assembly.
19