A V G 9 .0 A nti- V irus Bus ines s E dition © 2 0 0 9 C opyright A V G T ec hnologies C Z, s .r.o. A ll rights res erved.
2 2 7
o
Inform clients from Set X about update type of
– select either
Virus
database
or
Program
using the respective radio button.
Note:
When you put a station into both of the sets, it is taken as if it were in the
second one (the second set has higher priority). Thus you can define all your stations
in the first set and the stations with special rules to be applied in the second one.
Note:
Any AVG Managed Update related changes performed in the AVG Admin Server
Monitor configuration interface are saved after pressing the
OK
button.
The
Server info
button will open the following dialog:
·
Inform other AVG Admin Servers about update
By ticking this checkbox you will allow the application to also inform other AVG
Admin Servers about newly downloaded updates.
Enter the appropriate server IP value(s) to the
IP addresses of subordinated
servers
field. The AVG Managed Update updating command will then be sent to
these addresses. As a part of this command is information about the URL to be
used for updating.
If the AVG Admin Server does not receive a confirmation of the AVG Managed
Update command acceptance from one of the defined servers, it will repeat the
attempt later. Choose the requested time interval (in minutes) in the
Time until
next attempt connect (minutes)
section.
·
IP addresses of trusted sources of update commands
If you need the AVG Admin Server to accept unsecured AVG Managed Update
commands from different AVG Admin Servers, it is necessary to define IP
