A V G 9 Free © 2 0 1 0 C opyright A V G T ec hnologies C Z, s .r.o. A ll rights res erved.
3 8
7.3.2. E-mail Scanner Interface
In the
E-mail Scanner
component's dialog you can find a brief text describing the
component's functionality, information on its current status (
E-mail Scanner is active.
), and the following statistics:
·
Total e-mails scanned
- how many e-mail messages were scanned since the
E-mail Scanner
was last launched (
if needed, this value can be reset; e.g. for
statistic purposes - Reset value
)
·
Threats found and blocked
- provides the number of infections detected in e-
mail messages since the last
E-mail Scanner
launch
·
Installed e-mail protection
- information about a specific e-mail protection
plug-in referring to your default installed e-mail client
Basic component configuration
In the bottom part of the dialog you can find the section named
E-mail Scanner
settings
where you can edit some elementary features of the component's
functionality:
·
Scan incoming messages
- check the item to specify that all e-mails deliver
ed to your account should be scanned for viruses. By default, this item is on,
and it is recommended not to change this setting!
·
Scan outgoing messages
- check the item to confirm all e-mail sent from
your account should be scanned for viruses. By default, this item is off.
