A V G 9 Free © 2 0 1 0 C opyright A V G T ec hnologies C Z, s .r.o. A ll rights res erved.
1 2 3
On the
Schedule settings
tab you can first check/uncheck the
Enable this task
item
to simply deactivate the scheduled test temporarily, and switch it on again as the
need arises.
Within
AVG 9 Free
you cannot modify the scan's name, and the respective item is
deactivated.
In this dialog you can further define the following parameters of the scan:
·
Schedule running
- specify the time intervals for the newly scheduled scan
launch. The timing can either be defined by the repeated scan launch after a
certain period of time (
Run every ...
) or by defining an exact date and time (
Run at specific time ...
), or possibly by defining an event that the scan
launch should be associated with (
Action based on computer startup
).
·
Advanced schedule options
- this section allows you to define under which
conditions the scan should/should not be launched if the computer is in low
power mode or switched off completely.
Control buttons of the Settings for scheduled scan dialog
There are two control buttons available on all three tabs of the
Settings for
scheduled scan
dialog (
Schedule settings
,
How to scan
and
What to scan
) and
these have the same functionality no matter on which tab you currently are:
·
Save
- saves all changes you have performed on this tab or on any other tab
of this dialog and switches back to the
AVG scanning interface default dialog
.
Therefore if you wish to configure the test parameters on all tabs, press the
