Avery Dennison SNAP 600, Руководство пользователя

Страница: 76 / 141

76
User’s Manual—SNAP™ 600 Printer
11.0 Mechanical Troubleshooting
11.1 Stock
Problem Probable Cause Corrective Action
Stock will not roll
smoothly or the stock
jumps.
1) Web guides are incorrectly
adjusted.
1) Be sure stock roll is as flat as possible and
does not extend over core.
2) Adjust web guides to touch stock roll, but
do not pinch the roll.
Stock does not pull
smoothly through print
head module.
1) Web guides are too tight. 1) Adjust web guides to touch outer edges of
stock with the minimum pressure required.
Stock jams in bridge
blade rollers or knife
area.
1) Knife not cutting the full width
of stock.
1) Refer to section 6.4, Knife Shear
Adjustment.
2) Nip rollers are not turning. 1) Be sure the nip roller is free to rotate and
moves easily in the bearing slots. Check for
a loose drive gear.
IF THE RECOMMENDED CORRECTIVE ACTIONS DO NOT
RESOLVE THE PROBLEM (S), CONTACT YOUR LOCAL
AVERY DENNISON REPRESENTATIVE.