Avery Dennison Monarch 9493 SNP, Руководство администратора

Страница: 11 / 120

Getting Started 1-3
S y s t e m R e q u i r e m e n t s
To use the print server for printing from a wireless network, you need an
802.11b/g wireless network. The wireless network consists of either of the
following:
♦
An 802.11b/g wireless enabled computer printing straight to the printer
(Ad-Hoc, or peer-to-peer, mode).
♦
An 802.11b/g wireless access point allowing wireless enabled computers
to print to the print server (infrastructure mode).
To configure and print, you need the following information from your wireless
network administrator:
♦
Wireless Mode (infrastructure or Ad-Hoc)
♦
The SSID (service set identifier) for your wireless network.
♦
If you are using TCP/IP (recommended for Windows Networks) and are
not connected to a server that automatically assigns your IP address, you
need to set the printer in Static mode and assign a unique IP address (for
example: 192.168.1.14) and a subnet mask. A router (default gateway)
address is optional.
♦
Wireless security settings
N e t w o r k P r o t o c o l s S u p p o r t e d
♦
TCP/IP:
LPD/LPR, FTP, or IPP
Raw TCP/IP (port 9100 or any chosen port)
NetBIOS over IP (with SMB)
NetWare (NEST)
NetBEUI
DLC
♦
Telnet
♦
WINS
♦
DHCP