Avery Dennison Monarch 9493 SNP, Руководство администратора

Страница: 72 / 120

4-24 System Administrator’s Guide
To update from a file on your computer:
1. Type the location of the file or click Browse and select the file location.
2. Click Submit to load the firmware. If you lose power while updating the
firmware, call Service.
Note: Do not turn off the printer while it is updating firmware. It may take
several minutes to complete.
L o a d i n g t h e F i r m w a r e
Early versions of the software may have menus which differ slightly from
those listed below.
1.
Run the UpdateIP utility from the Monarch® Documentation CD-ROM
(TC9X00SWP), or download it from our Web site.
2.
Select the update .bin file, print server, then click Update , Start .
3.
If you are using TCP/IP to upgrade, select TFTP PUT from this host.
If you are upgrading using IPX/SPX on a NetWare network to upgrade,
select
NetWare GET from a server (If you are using NetWare to upgrade,
you need to put the .bin firmware file in the LOGIN directory of the
NetWare server). Click
OK .
4. If you selected TFTP PUT from this host in step 3, enter the
configuration password (default is
access
) and click Browse to find the
.bin firmware file you downloaded. Click Load . The firmware on your
print server will be upgraded to the new version.
If you selected NetWare GET from a server in step 3, enter the
configuration password (default is
access
). Enter the name of the
NetWare server where you saved the .bin file as the Host Name.
Enter the name of the firmware file for File. Click
OK . The firmware
on your print server will be upgraded to the new version.