Selecting a Management Method
3-7
I B M A I X C o n f i g u r a t i o n
To configure a print server on IBM AIX 4.x, use the SMIT program as follows:
1.
Enter SMIT and select
Devices
.
2.
Select
Printer/plotter
.
3.
Select
Manage remote printer subsystem
.
4.
Select
Client services
.
5.
Select
Remote printer queues
.
6.
Select
Add a remote queue
. Enter the following remote queue settings:
♦
Name of queue to add (user selectable) Activate the queue (Yes).
♦
Destination host (print server’s IP address; or if you have configured
the /etc/hosts file, use the name of the print server that you specified
in that file).
♦
Name of queue on remote printer BINARY_P1 for binary files or
TEXT_P1 for text files).
♦
Name of device to add (user selectable; for example lp0).
7.
You should now be able to print using the normal lp -d command.
Note:
The configuration for earlier versions of AIX is slightly different.
The print server can also be configured as a JetDirect card using
AIX. To do this, refer to your AIX documentation.
C o n f i g u r a t i o n o n O t h e r S y s t e m s
The print server can be used with any computer system that supports the
LPR/LPD protocol or HP JetDirect (port 9100 is the default; however, it can
be reconfigured). Refer to the system’s documentation to configure
LPR/LPD or JetDirect print queues.
Содержание Monarch 9493 SNP
