avertX HD848IRM Скачать руководство пользователя страница 35

Страница: 35 / 56

37736AA

Parameter

Description

Exposure Mode

Select the correct exposure mode to achieve the desired exposure effect.

Shutter (s)

Shutter is used to control the light that comes into the lens. A fast shutter speed is

ideal for scenes in quick motion. A slow shutter speed is ideal for scenes that

change slowly.

Note:

You can set a shutter speed when Exposure Mode is set to Manual.

If Slow Shutter is set to Off, the reciprocal of the shutter speed must be greater

than the frame rate.

Gain (dB)

Control image signals so that the camera outputs standard video signals

according to the light condition.

Note:

You can set this parameter only when Exposure Mode is set to Manual.

Slow Shutter

Improves image brightness in low light conditions.

Slowest Shutter

Set the slowest shutter speed that the camera can use during exposure.

Note:

You can set this parameter only when Slow Shutter is set to On.

Compensation

Adjust the compensation value as required to achieve the desired effects..

Metering Control

Set the way the camera measures the intensity of light.

Center-Weighted Average Metering

: Measure light mainly in the central part of

images.

Evaluative Metering

: Measure light in the customized area of images.

Day/Night Mode

Automatic

: The camera outputs the optimum images according to the light

condition. In this mode, the camera can switch between night mode and day

mode automatically.

Night

: The camera provides high-quality black and white images using the

existing light

Day

: The camera provides high-quality color images using the existing light.

Day/Night Sensitivity

Light threshold for switching between day mode and night mode. A higher

sensitivity means that the camera is more sensitive to the change of light and

becomes more easily to switch between day mode and night mode.

Note:

You can set this parameter only when Day/Night Mode is set to Automatic.

Day/Night

Switching(s)

Set the length of time before the camera switches between day mode and night

mode after the conditions for switching are met.

Note:

You can set this parameter only when Day/Night Mode is set to Automatic.

WDR

Enable WDR to distinguish the bright and dark areas in the same image.

Note:

You can set this parameter only when Exposure Mode is set to Automatic,

Indoor 50Hz, Indoor 60Hz and when Defog is disabled.

Содержание HD848IRM

























































Результаты поиска

Содержание HD848IRM

Отзывы:

Похожие инструкции для HD848IRM

Бренды по названию

Популярные бренды

avertX HD848IRM, Руководство пользователя

Результаты поиска

Содержание HD848IRM

Отзывы:

Похожие инструкции для HD848IRM

Бренды по названию

Популярные бренды