AVerTV 6
16
Chapter 4 TV
In this chapter, we will introduce methods to scan programs, select a TV/Radio program,
create a group and so on.
4.1 Analog
TV
4.1.1 Scanning
Channels
If you haven’t done channel scanning when you first run the application, please follow
the steps to complete this procedure.
1.
Click the
Setup
button
and in the
Setup
dialog box, select an available Avermedia
device in the left pane.
Note:
Make sure that your Country/Region is correct.
a.
First, select an available Avermedia device in the left pane.
b.
From the Region/Country drop-down list, select your country or region.
c.
Click
Apply
to save the settings.
2.
Then select
Analog TV (or Programs)
. On this page, choose the
TV
option to search
only for air channels or select
CATV
to scan for cable channels.
3.
Click
New
and
the
Program List
dialog box will appear. Type in the desirable name
and click
OK
4.
Then Click
Program Scan
to start the searching process.
The application comes with a default frequency table therefore the application will
use this table to search for active channels/programs. If you want to terminate the
searching process, just click
Stop.
5.
You can check the scanning progress from the progress bar. After scanning, the active
TV/Radio channels will be listed inside the box. Click
Apply
to save the scanned
channels.
