Avermedia AVerDiGi EB3004 NET+, Руководство пользователя

Страница: 67 / 88

62
8.1.1.5 Network Setup
(1)
(2)
(3)
(4)
(1) IP Mode
The system provides 3 types of IP setup mode – STATIC, DHCP, and PPPOE.
- STATIC: Assigns a constant IP address for the DVR system.
- DHCP: Assign the IP address by local DHCP server to DVR system.
i
The DHCP (Dynamic Host Configuration Protocol) is a set of rules used by a communications
device (such as a computer, router or networking adaptor) to allow the device to request and
get an Internet address from a server which has a list of addresses available for assignment
-
PPPOE: Point-to-Point Protocol over Ethernet is a network protocol for encapsulating PPP frames
in Ethernet frames. It is used mainly with ADSL services. If your network is using ADSL service
connecting to internet, and then, select PPPOE mode.
(2) Remote audio record
Enable/disable the audio recording at remote site.
(3) DDNS
Dynamic Domain Name Service is a data query service mainly used on the Internet for translating
domain names into Internet addresses.
-
Domain Name: Enter the domain name that user has registered.
-
Password: Enter the password that user has setup when registered the domain name.
(4) Stream Setup
Click it to setup each channel stream and quality for the remote site viewing.
-
Enable
Enable/disable the channel. If channel is disabled, the video stream will not been seen in
remote site and transmitting to remote site.
-
Network Stream FPS