Avenview MLT-PROWALL-4K, Руководство пользователя

Страница: 49 / 54

Application example: when cascade with two
MLT-PROWALL-4K
, user can set three display styles:
1. To show cascade image with single content across whole video wall.
2. To show two side by side contents across whole video wall.
3. To show one PIP content in cascaded image.
4. To show two PIP contents in cascaded image.
User can save these different display styles in MLT-PROWALL-4K and recall them by RS232 or remote controller.
Please note:
When execute system reset, Profile settings will remain the same without change.
If the settings in Dip SW on the front panel are different from the settings in [Profile], Dip SW setting will
have the 1
st
priority. For example, if your Dip SW selects Display mode # 02 and you select mode #05 via OSD.
Once you power OFF/ON the system again, it will show mode #02 but not mode #05. The same issue will
happen in PIP/POP settings, if you select a position and size of PIP image by OSD menu, once you power OFF/ON
the system, it will follow the setting in Dip SW but not OSD. You need to load the profile to get new OSD
settings.
10.5.5.5 [Network]
Five indexes can be chosen to save MLT-
PROWALL-4K settings and can be recalled by
IR remote controller or RS232 via [Load]
menu under [Profile]
Only RS232 under this Menu.
User can use external UART to Ethernet
converter to control MLT-PROWALL-4K through
Ethernet control system.
User can use simple button type RS232
controller to switch among different
Profile settings.
40
www.av enview.com