Avenview MLT-PROWALL-4K, Руководство пользователя

Страница: 37 / 54

10 OSD menu and functions
OSD function is only available in MLT-PROWALL-4K model. User needs to connect IR extender module to the
socket on the back panel and use IR remote controller to activate OSD menu and functions.
IR remote controller IR Receiver Extender
Important notice:
1. Please set all Dip SW on [Main Input] at OFF position to assign system control authority to OSD menu so
that OSD setting will be executed while the system is powered OFF & ON.
2. If any Dip SW in [Main Input] is not at OFF position, when the system is Power OFF and Power ON again,
the system will check the Dip SW setting and execute the command in Dip SW setting. It will not implement
the settings in OSD or settings stored in [Profile Index]. Under this condition, if user wants to implement
previous setting, user needs to use remote controller to load the setting from [Profile] [Load] [Index 1-5]
or use RS-232 command to load Profile [Index] settings.
3. After finished OSD operations, Please save OSD settings into Profile [Index] (see page 44) for long term
reservation.
4. IR Remote Controller has Shortcut key for Profile [Index] loading function (see below picture).
[OTH] Profile shortcut key
to load Profile [Index]
Please set all Dip SW on [Main Input] at OFF position to assign system
control authority to OSD menu.
If user selects input port by Dip SW (at ON position), then when MLT-PROWALL-4K Ex is
powered ON, the system will follow Dip SW setting to show the image. In this
case, user will not see OSD setting result.
2 8
www.av enview.com