Avenview MLT-PROWALL-4K, Руководство пользователя

Страница: 42 / 54

10.4 Video Wall Setting
The purpose for Video Wall Setting is for cascade multiple MLT-PROWALL-4K to become one video wall display.
It consists below functions:
[Output Mode]:To show display modes on OSD for easy display mode selection
[Zoom]: To split source image into different section for each MLT-PROWALL-4K.
[Pan]: to assign each image section to each MLT-PROWALL-4K at the right location.
[Overlap]: to re-allocate each image section at the right location for the cascade to become a complete big video
wall display.
The maximum video wall can be up to 15x15=225 MLT-PROWALL-4K. If each MLT-PROWALL-4K is connected
with 4x LCDs, then theoretically the total number of the LCD display can be up to 30x30=900 LCDs from single
signal source.
10.4.1 Output mode
[Output mode] shows pre-defined modes in MLT-PROWALL-4K. When user selects desired display mode,
the mode # will be showed at the bottom.
Cascade with 4x
MLT-PROWALL-4K
to get 4x4 4k/2k
video wall
33
www.av enview.com