Avenview MLT-PROWALL-4K, Руководство пользователя

Страница: 39 / 54

10.3.1 Color
10.3.2 Scaling
10.3.3 PIP/POP Setting (Picture in Picture & Picture outside Picture)
Picture in Picture (PIP) function is to display two images from one MLT-PROWALL-4K. The maximum size of the
sub-image (PIP) is 1024x768 pixels. The input source for PIP is selectable and can be from any input port of MLT-
PROWALL-4K. The input for main and PIP image can be the same or swapped. The location of the PIP image can be
controlled by OSD menu at any location inside main image. The size of the PIP image is also flexible and can be
controlled by OSD menu as well. Both main and PIP image will go through high end 3D motion
de-interlacing. If a PIP/POP image is required to across multiple MLT-PROWALL-4K, then user can add one MLT-
PROWALL-4K with PIP/POP function at the front end and connect the output to multiple MLT-PROWALL-4K
Under [Colour] menu:
-4 Preset modes for colour temperature
selection
[Custom]: Independent RGB colour adjustment
If user wants to keep PIP setting while
system power on, user needs to set all [Main
Input] Dip SW at OFF position and select input
signal by OSD menu.
Dip SW PIP/POP setting has only preset
image sizes and positions.
[Full Screen]:
To fit source image for full screen display
[Original AR]
To display source image with the same aspect
ratio as source image
30
www.av enview.com