aventon POWER SHARE CTS36ABU1, Оригинальное руководство пользователя

Страница: 12 / 31

8
. MAINTENANCE
Before each use, conduct a safety inspection of the scooter, including:
1. Brake Lever: Test the brakes by trying to roll your scooter forward and back while squeezing the brake lever. The back
wheel should not rotate.
2. Throttle: Test the throttle by applying pressure downward and then release the pressure. Check that it springs back to its
original position.
3. Damage: Check the Frame, Pole, Handlebars, and deck for any dents, cracks, or signs of other damage.
4. Steering: Check to make sure the steering is handling properly by rotating the handlebars to the left and right.
5. Lights: Make sure that your front and rear lights turn on
6. Wheels: Make sure the wheels are in good condition and check for any signs of excessive tread wear.
7. Screws: Make sure the pole is securely attached to the base of the scooter. If you notice any play in the pole (i.e.
swaying or moving back-and-forth) you likely need to tighten the screws you installed during assembly.
8. Error Codes: Check the Display for error codes. If any are present, do not ride the scooter and contact Customer
Support.
Cleaning and Storage
You can wipe it down with a soft damp cloth or towel and/or scrub it with a soft bristled toothbrush. Be sure that you do not
use corrosive substances/cleaning solutions because they could damage your Scooter (don’t use gasoline, kerosene,
acetone, alcohol, bleach etc.)
You are responsible for monitoring the condition of your scooter, maintaining the components and using only authorized
replacement parts.
Lubrication Recommendation
It is recommended to add some lubrication grease to the rotating part on the top of the rear suspension every 3-6 months to
ensure optimal performance.
Do not modify the scooter. Doing so will void any applicable warranties and may put you at increased risk of
serious injury or death.