AVE MVDR5000 Скачать руководство пользователя

Страница: 83 / 94

7.2 Hard Disk Installation

Usually the unit comes with one hard-disk

drive installed in compartment HD 1, which is

default-configured as a master. Serial ATA

(SATA) interface disk drives are designed for

easy installation. It is not necessary to set any

jumpers, terminators, or other settings on this

drive for proper operation. To install two

hard-disk drives in the compartments for HD 1

and HD 2, please take the following steps.

(For removable model only.)

7.2.1 Built-in hard disk

Unscrew all the 4 mounting screws on the mobile
rack of the unit and detach it.

Carefully lift the mobile    Unscrew the secured
rack to a vertical    screws to detach the
position.             hard disk rack.

Carefully insert a SATA Place the hard disk in
hard disk. the rack.

Secure the driver in the rack using 4 mounting

screws in the side-mounting holes. Please don’t
tighten the screws too much, otherwise that may
damage the driver.

Screw the rack into the Attach the interface
device, tightening in all connector and the power
the 4 screws.

connector to the drive.

Place the mobile rack back onto the device and
screw in all the 4 screws.

Содержание MVDR5000































































































Результаты поиска

Содержание MVDR5000

Отзывы:

Похожие инструкции для MVDR5000

Бренды по названию

Популярные бренды

AVE MVDR5000, Руководство по установке и эксплуатации

Результаты поиска

Содержание MVDR5000

Отзывы:

Похожие инструкции для MVDR5000

Бренды по названию

Популярные бренды