User guide Andante 8
page 22
By turning the p/p button the following appears:
Preset 1: In EQs
Preset 1: Copy
Turning of the w/w button: Selects which copy from Preset 1 (in EQs) to Preset 2-20
Briefly press the p/p button: copy starts.
By turning the p/p button the following appears:
Preset 1: Out EQs
Preset 1: Copy
Turn w/w button: Selects which copy from Preset 1 (Out EQs) to Preset 2-20
Briefly press the p/p button: copy starts.
Turn p/p button
Preset 1: Setup
Preset 1: Copy
Turn w/w button: Selects which copy from Preset 1 (Setup) to Preset 2-20
Briefly press the p/p button: copy starts.
Turn p/p button
Preset 1 Setup
Reset
Briefly press p/p button to delete the displayed preset
Briefly press w/w button - turn p/p button (go back)
Save Changes
-> Exit OK
Press w/w button: Exits the menu without saving
Press p/p button 2 times: Save
By turning the p/p button you leave the
Preset Setup
and enter
System Setup
Briefly press to enter the menu.
Startup preset
Turn w/w button: Selection of presets, with which the device starts at switching on.
Turn p/p button:
Main VU-meter
Turn w/w button: Selects the VU meter in the display input 1-16 or output 1-8
Turn p/p button:
Panel protection
Turn w/w button: Panel protection on/off in user mode
Turn p /p button:
PIN code request
Turn w/w button: PIN code request on/off in admin mode
Turn p/p button:
PIN code change
Press p/p button: confirm new PIN code
Turn p/p button: RCA Input 8 Enable (turn on input 8 to RCA - CD, cassette)
Turn w/w button: on/off
Turn p/p button: RCA Input 16 Enable (turn on input 16 to RCA - CD, cassette)
Turn p/p button: welcome text (any entry)
Procedure as text or numerical entry (see above)
Turn p/p button: LCD contrast level
Turn w/w button: sensitivity adjustment
Turn p/p button: global settings - reset
Press p/p button: confirmation No / Yes
Attention: If you press yes, you will delete all previous settings and reset the unit back to factory condition!