User guide AMV 2125-DSP
page 8
T
HE FOLLOWING MODIFICATIONS ARE TO BE PERFORMED BY
QUALIFIED AUDIO TECHNICIANS ONLY
.
4.2
The Parameter-Menu / Programming of AMV 2125-DSP
Functions and settings in the parameter domain should be changed by qualified personnel
only. The only exception is the programming of a new preset as described in section 4.1.
The digital control boasts the great advantage of the programmability of various functions. In
this parameter menu, not only the presets are programmed, but among others, the equalizers
and the parameters for feedback elimination are set. In fact, the entire programming of the
GENIO 10 is done here with menu-driven user guidance by using the display and merely the
“Volume” and “preset”-knobs. No PC or Laptop is required.
In order to enter the parameter menu first turn the unit off.
Then, turn it back on again while pushing the
“Volume” dial until the parameter menu with its
four items “preset, parameters, config, and service” appear.
By turning the preset dial, you can change from one menu item to the next which is indicated
by a small triangle.
By pushing the preset dial, you choose the mode
„Edit Parameterset 1“ (see below)
By turning the Volume-dial you can choose which Parameterset you would like to change. You
have 4 possibilities (1-
4). Press the “Preset”-knob again and select the equivalent menu.
The following applies:
Turning the preset dial one click to the right will always bring you to the next item of a menu, i.
e. to the next parameter to be programmed. This dial
is therefore marked „parameter“. For
simplicity, we will continue to name this dial the preset dial.
Changing a value or character is always done by turning the volume dial. This dial is therefore
also marked „value“. However, here too for simplicity, we will stay with the name of volume
dial.
This dial is a so-called dynamic rotary dial, meaning that when slowly turning it, the value will
change in small increments whereas turning a dial by the same amount more quickly will
change the value proportionally faster. This enables a fast but precise setting of the desired
values.
By pushing the volume dial, you will go up one level in the menu structure. Whenever you
have changed any parameter, you will be asked whether you would like to „Save changes?“
Pushing the volume dial
indicates „yes“ and your changes will be saved (
„Saving … do not
interrupt“). Pushing the preset dial indicates „no“ and the display will show „Changes
discarded!“.
The following 4 sections will describe the programming possibilities of the 4 menu items.
4.2.1
Preset
Select the desired number out of Edit-Preset-Menu.
Preset name
: Determine the name for a given preset. The procedure is described in detail in
section 4.1.
Preset master volume
: Setting the master volume for a given preset.
