User guide AMV 2125-DSP
page 5
3.
Handling the unit
3.1
Microprocessor gate control
Continous level monitoring of 5 input channels by RISC microprocessor
Level compare accuracy better than ±2 dB
Channel on attack time less than 10 ms
Channel on hold time 256 ms (default) / 512 ms, selectable via switch
Last On (default) / Channel 1 On, selectable via switch, hysteresis 6 dB
Simultaneous active channels: none, two, three or four.
Switch 1
Hold time
Off
256 ms
On
512 ms
Switch 2
Active channel
Off
Last channel
On
Channel 1
Should
the
microphones
work
independently of the automatic remove
the nut M3. Now you can pull the
board to the rear.
After removal of the corresponding
jumpers tighten the board again.
Switch 3
Switch 4
Active channels
Off
Off
None
Off
On
2 channels
On
Off
3 channels
On
On
4 channels
