Avdel 7611, Инструкция по эксплуатации

Страница: 6 / 24

The hydro-pneumatic 0761 MkII type tool has three models each designed to place at high speed a different type of fastener as s hown
in the table below, making it ideal for batch or flow-line assembly in a wide variety of applications throughout all industries .
Throughout this manual we refer to the different models without adding ‘Mk II’ after the model number. It is important to remember
that all models describes in this manual are Mk II models and supersede original models. The MK II model for the 07611 start
at serial
number 400 and at serial number 3001 for the 07613 and 07614 models.
All three models are supplied standard with a stem deflector and the option of a stem collector. For more details see the ‘Acc esssories’
section.
A complete tool is fitted with a fixed straight nose assembly suited to the fastener you wish to place and a priming pump is al so included.
See the Priming section for more details. It is also possible to order the base tool only, which is supplied without a nose as sembly or
a priming pump. For more details on the base tools, see the respective general assembly drawings and part lists.
To select the part number of a major item use the table below. For more component details of nose assemblies, see the ‘Nose Ass emblies’
section.
4
I
N T E N T O F U S E
hre
0761 TOOL SELECTION
F A S T E N E R
TYPE SIZE *
BASE TOOL
PART Nº
MATERIAL
NOSE ASSEMBLY
PART Nº
COMPLETE TOOL
PART Nº
TOOL
MODEL
07611 AVTAINER
9.5
3
/
8
STEEL 07611-00200 07498-00800 07611-00001
07613 MAXLOK 4.8
3
/
16
STEEL & ALUMINIUM 07613-00200 07610-02000 07613-00001
6.4
1
/
4
STEEL & ALUMINIUM 07613-00200 07610-02100 07613-00002
07614 HEMLOK 6.4
1
/
4
STEEL & ALUMINIUM 07614-02000 07612-02000 07614-00002
*
Sizes in bold are millimetres. Other sizes are in inches.
Dimensions on the opposite page, particularly around the nose assembly area, will help you assess the accessibility of your app lication.