29
Service check list
(for the Quingo Engineer)
Check page 26 for fault codes
Initial diagnostic road test
Wheel bearings wear and lubricate
Wheel alignment of the 3 front wheels. There must be a negative toe in 1 to 5 degrees
Steering and tilting mechanism. Check that it locks under pressure
Wear or damage to tyres or wheels
Bodywork fixtures
Throttle play and adjustment. Check for full and free movement
Bodywork, wheel clearance, lights secure
Steering bearing for wear. Check for backwards and forwards movement.
Seat mounting. Check the access feature works correctly with the warning lamps
Transaxle mountings are tight
Handlebar alignment, check for damage
Motor brush wear
Motor speed check
Transaxle play
Electromagnetic brake operation
Freewheel operation, check the display fault indicator, check brake holding on slope
Frame for damage, cracks or corrosion
General corrosion
All operational controls work correctly
Battery condition and charger operation
Tighten all nuts & bolts
Check tie rod bolts
Final road test
Clean vehicle
Customer road test & sign off
