19
Battery Charging
Connection Instructions
When you receive your scooter the
batteries are partially charged.
Fully charge for 12 hours before use.
Place your scooter in an area that is dry
and well ventilated. Make sure a power
point is nearby.
The scooter should be switched off and
the key removed.
Turn off the mains switch. Never connect
or disconnect the charger with the mains
turned on.
Connect the charger to the charging
socket on the tiller (see Fig 1.)
Once the charger is connected, switch
on the mains.
The power-on lamp illuminates red when
switched on. The charger lamp starts
yellow, changes to green when charged
(charge for the full duration 8-12 hours).
Switch off the mains and remove the
plug from the battery when fully charged.
Do not leave the charger plugged in with
the power off. This will discharge your
battery.
Correct charging prolongs battery life.
Fig 1. Insert charging plug here
Mains connector
Yellow=charging
Green=fully charged
Red = power on
On(I) off(O) switch
