Related Links
on page 8
Deploying Scopia
®
XT Desktop server with Dual-NIC
Scopia
®
XT Desktop server can be installed on servers with multiple Network Interface
Cards (NICs). Depending on the deployment and network configuration, you may want to control
which NIC is used for various server communications.
Important:
The minimum requirement is to use a 100 Mbit NIC. It is recommended that you use a Gigabyte
NIC for better performance. Bandwidth shown is for Standard Definition (384 kbps) or High
Definition (1024 kbps).
For example, in secure multiple NIC deployments you can use a NIC configured behind the firewall
to communicate with the Avaya Scopia
®
XT Series, while using another NIC for Scopia
®
XT
XT Desktop with a dual-NIC deployment
on
page 12). In this case, configure the Scopia
®
XT Desktop IP address to represent the NIC behind
the firewall. For the Scopia
®
XT Desktop public address, use a DNS name which resolves to the
NIC outside the firewall, and is accessible both inside and outside the enterprise.
For more information and to configure the public address, see
Public Address and Other Client Connection Settings
on page 31.
Figure 5: Scopia
®
XT Desktop with a dual-NIC deployment
Scopia
®
XT Desktop Clients can connect to the Scopia
®
XT Desktop server either by an IP address
or a DNS name. In many deployments the Scopia
®
XT Desktop server IP address is not accessible
to clients outside the enterprise due to NAT or firewall restrictions. Therefore, Scopia
®
XT Desktop
server has a public address, which must be a DNS name resolving to the correct Scopia
®
XT
Desktop server IP address both inside and outside the corporate network.
Planning your Avaya Scopia
®
XT Desktop Deployment
12
Avaya Scopia
®
XT Desktop Server Installation Guide
August 2015
Содержание Scopia XT Camera Switch
Страница 1: ...Avaya Scopia XT Desktop Server Installation Guide Release 8 3 3 Issue 1 August 2015...
Страница 2: ......