4 Connecting to the PARTNER System
Direct Dial Connection
33
Getting Started
Configuring the PARTNER System for Remote Direct Dial
Before you can connect to the PARTNER system via an outside phone number,
you must perform the following steps:
1 Assign the outside line to a Hunt Group.
2 Program the Hunt Group to ring at the modem.
3 Change the ringing options so the dedicated line does not ring at all the
phone extensions or remove the line from the other extensions.
To configure the PARTNER system for remote Direct Dial:
1 From extension 10 or 11, press
f00
.
2 Press the left
i
twice.
3 Enter
#206
.
4 At the Group: prompt, enter a group number (1-6). We recommend the
number 6.
5 At the Line prompt, enter the line number that you will be dedicating to use
for remote access.
6 Enter
#505
.
7 At the Group: prompt, enter the number you entered in Step 4.
The following display appears:
HUNT GROUP 6
EXTENSION:
8 Perform one of the following steps:
— If you are using an external modem, enter the extension to which the
modem is connected.
— If you are using a Remote Access card, enter
76
. (This is the
pre-established extension number for your PARTNER Remote Access
card.)
9 Exit programming mode by pressing
f00
.
10 From extension 10 or 11, press
f00
.
11 Press the left
i
twice, and then press the right
i
once.
PCAdminGS.book Page 33 Wednesday, May 19, 2004 1:28 PM
