Avaya P460, Справочное руководство

Страница: 120 / 224

Chapter 2 Avaya P460 CLI Commands
110 Avaya P460 Reference Guide
set snmp retries
User level: read-write, admin.
Use the
set snmp retries
command to set the number of retries initiated by the
P460 Manager when it tries to send SNMP messages to the switch.
The syntax for this command is:
set snmp retries <number>
Example:
set snmp timeout
User level: read-write, admin.
Use the
set snmp timeout
command to set the SNMP timeout in seconds. This
command is useful for access using the P460 Manager.
The syntax for this command is:
set snmp timeout <number>
Example:
set snmp trap
User level: read-write, admin.
Use the
set snmp trap
command to add an entry into the SNMP trap receiver
table and to enable or disable the different SNMP traps for a specific receiver.
First add the
rcvr_addr
and then enable/disable the different traps for it.
The syntax for this command is:
set snmp trap <rcvr_addr>
number Number of retries
P460-1# set snmp retries 10
SNMP retries is set to 10
number Timeout in seconds
P460-1# set snmp timeout 2000
the SNMP Timeout is set to 2000