2030 & 2050 Telephone User Guide
Page 21
IP Office
40DHB0002UKAG Issue 7c (17th May 2004)
Diverting Calls
Setting Divert Numbers
You can set separate divert numbers for All (also called Forward Unconditional) and for On Busy/No
Answer. Note that divert on no answer does not work if you also have voicemail.
For divert all you can also create a set of 'targets'. This then allows you to set the number to which you
divert calls by selecting from a list of names.
To set a divert number:
1. Press
PROGRAM
and then
DIVERT
.
2. Enter your phone's passcode (see
The Phone Passcode
).
3. Select
ALL
,
NO ANS
or
ON BUSY
. If you want to set a divert all target see below.
4. The display shows the current diversion number (if set).
5. Press
z
CANCEL
and then dial the new number.
•
You can use
z
SET
or
z
CLEAR
to switch use of the divert on or off.
6. Press
z
DONE
and select another divert if required.
7. Press
PROGRAM
to finish.
To set divert all targets:
1. Press
PROGRAM
and then
DIVERT
.
2. Enter your phone's passcode (see
The Phone Passcode
).
3. Press
SCROLL
and select
z
TARGETS
.
4. If you already have target numbers set the first is shown along with its associated name. Press
z
NEXT
to display the next target if set. Use
z
EDIT
to alter the current displayed target.
5. If you want to create a new target, press
SCROLL
and select
z
NEW
.
•
Enter the target name. To do this press the key with the required character. Press
z
ROTATE
to change the character to the one required. Use the
z
key on the left of the
name to delete the last character. Use the
z
key on the right of the name to add spaces.
When you have completed the name press
z
DONE
.
•
Enter the number for the target. Use
z
CANCEL
to remove any existing number or
z
RENAME
if you need to change the name again. When both the name and number are
set as required press
z
DONE
.
6. To finish, press
SCROLL
. Press
DONE
and then
DONE
again. Press
PROGRAM
.
