Avaya IP Agent, Инструкция по установке и эксплуатации

Страница: 71 / 286

Road Warrior and Telecommuter configurations
Issue 1.1 August 2004 71
2. Enter
change station XXXXX
where
XXXXX
is the number of the station to be used
with Avaya IP Agent.
The Avaya communication server displays the change station form for the specified
station.
3. In the Type field, enter the type of telephone that Avaya IP Agent will emulate.
Avaya recommends using one of the following telephone types because of the number
of features available and the ability to display 80 characters for contact center or call
information:
●
8434D
●
606A1
Note:
Note:
In Telecommuter mode, Avaya IP Agent can take over the administration
and functionality of a physical Digital Communication Protocol (DCP)
telephone. The physical telephone must be one of those listed in
Compatible
telephone types for Avaya IP Agent on page 21. For DCP, the physical
telephone is unusable while Avaya IP Agent is registered with its extension.
The telephone will become usable again when the Avaya IP Agent session
is disconnected from the Avaya communication server.
If you selected the 8434D type, and more feature buttons are needed for the station,
enter y in the Expansion Module field.
4. Enter one of the following options in the Port field:
●
X - This option specifies that station administration is done without hardware.
●
port - This option is used when a remote agent takes direct control of a real
extension that has a DCP connection to the Avaya communication server. Enter the
port number of the actual telephone assigned to this extension. When a remote
agent logs in to this extension using Avaya IP Agent, the actual telephone that is