Avaya H.323 9621G Скачать руководство пользователя страница 9

Страница: 9 / 94

Enhancement

Description

SSO_ENABLED: To implement the Single Sign On
feature.

AGTSPKRSTAT: Modified to allow the call center agent to
use the SPEAKER button to release an ongoing call.

LOCALZIPTONEATT: To control the volume of local phone
ziptone heard when using AUTOANSSTAT= 1.

PHY2_AUTOMDIX_ENABLED: To configure automatic
recognition of crossover or straight Ethernet cables on the
deskphone PC port (Auto MDIX).

LEDMODE: To support different LED behaviors. Old
behavior is maintained as default (LEDMODE 0).

Single Sign on

To allow a PC user to control the login and locked status of
a telephone from the PC.

Note:

Contact DevConnect for more information on obtaining
the API and developing PC client applications.

Identity Certificate (SCEP)
support

To perform secure backup of agent greetings.

Authentication using EAP-
TLS

To authenticate the users using the EAP-TLS mode of
secure authentication.

IP redirect

The IP redirect feature directs deskphones to download
software from the nearest server on the network, thereby
reducing download time.

Note:

Voice Initiated Dialing (VID) is no longer supported on the H.323 9600 Series IP
deskphones.

Enhancements in H.323 Release 6.2 Service Pack 4

H.323 Release 6.2 Service Pack 4 has the following enhancements:

• Debug feature is accessible only if you have changed the default password for the craft

menu.

• Support for Wireless (Jabra/Plantronics) EHS cable firmware.

Enhancements in H.323 Release 6.2 Service Pack 4

Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G

August 2013 9

Содержание H.323 9621G































































































Результаты поиска

Содержание H.323 9621G

Отзывы:

Avaya H.323 9621G, Установка и обслуживание, Страница: 9 / 94

Результаты поиска

Содержание H.323 9621G

Отзывы: