manualshive.com logo in svg

Avaya H.323 9621G, Установка и обслуживание, Страница: 54 / 94

Поделиться
Скачать
Avaya H.323 9621G Скачать руководство пользователя страница 54

Setting

Options available

Log to file

On/Off

Phone Report

Pressing 

Change

 when you select the

Phone Report option results in a 

Create

option displayed on the phone screen.
Press 

Create

 to send the report to the

backup folder specified by BRURI.

 Note:

The 

Phone Report

 option is

available only if  backup and restore
is enabled.

Port Mirroring

On/Off

2. Scroll to the option that you want to change and press 

Change

 or touch 

OK

 to toggle

the selected setting from the available options. The deskphone displays the softkeys

Save

, 

Change

, and 

Cancel

.

3. If you have made any changes to the Debug Mode option, then you must press or

touch the 

Save

 option. This action resets the phone and saves the changes to the

debug screen.

Changing the group identifier

About this task

 Note:

When updating local Craft procedures from a touch screen deskphone, touching the line

you want to change or the applicable softkey produces the same result as selecting a line

and pressing the applicable softkey on a non-touch screen IP deskphone.

Use the following procedure to set or change the group identifier.

 Note:

Perform this procedure only if the LAN Administrator instructs you to do so. For more

information about groups, see 

Applying settings to logical groups

 on page 69.

Using Local Administrative Craft Options

54     Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G

August 2013

Comments? [email protected]

Содержание H.323 9621G































































































Отзывы:

Нет отзывов