Avaya H.323 9621G Скачать руководство пользователя страница 61

Страница: 61 / 94

Restarting the deskphone

About this task

Note:

When updating local Craft procedures from a touch screen deskphone, touching the line

you want to change or the applicable softkey produces the same result as selecting a line

and pressing the applicable softkey on a non-touch screen IP deskphone.

Use the following procedure to restart the deskphone.

Procedure

1. Select RESTART PHONE from the Craft Procedures screen. The deskphone

displays the following text:

Press Restart to confirm.

2. Press

Cancel

to return to the Craft Procedures screen without restarting the

deskphone.
Press

Restart

to proceed with the registration steps. For more information, see

Powering-up and resetting the deskphone (Dynamic Addressing Process)

page 27.
A restart does not affect user-specified data and settings like Contacts data or the
deskphone login and password.
The completion of the restart procedure depends on the status of the boot and
application files.

Setting or changing the signaling protocol

About this task

Note:

When updating local Craft procedures from a touch screen deskphone, touching the line

you want to change or the applicable softkey produces the same result as selecting a line

and pressing the applicable softkey on a non-touch screen IP deskphone.

Use the following procedure to set or change the Signaling Protocol Identifier. A valid SIG

Protocol Identifier is either 0 (default), 1 (H.323), or 2 (SIP).

Restarting the deskphone

Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G

August 2013 61

Содержание H.323 9621G































































































Результаты поиска

Содержание H.323 9621G

Отзывы:

Avaya H.323 9621G, Установка и обслуживание, Страница: 61 / 94

Результаты поиска

Содержание H.323 9621G

Отзывы: