Avaya H.323 9621G Скачать руководство пользователя страница 71

Страница: 71 / 94

Chapter 5: Troubleshooting

Resolving error conditions

About this task

Installers can troubleshoot problems before seeking assistance from the system or LAN

administrator in four areas:

Procedure

1. Check both the power and Ethernet wiring for the following conditions:

• Check whether all components are plugged in correctly.

• Check LAN connectivity in both directions to all servers - DHCP, HTTP,

HTTPS, DEFINITY

/MultiVantage

™

• If the deskphone is powered from the LAN, ensure that the LAN is properly

administered and is compliant with IEEE 802.3af.

2. If you use static addressing:

• Use the VIEW option to find the names of the files being used and verify that

these filenames match those on the HTTP/HTTPS server. For more
information, see

Using the VIEW craft procedure for troubleshooting

page 72. Check the Avaya Support site at

www.support.avaya.com

to verify

whether the correct files are being used.

• Use the ADDR option to verify IP addresses. For more information, see

Changing IP address information

on page 46.

3. If the deskphone is not communicating with the system, DHCP, HTTP, or Avaya

Media Server, make a note of the last message displayed. For more information,
see

Installation error and status messages

on page 76 and

Operational errors

and status messages

on page 80.

Consult the system administrator. Sometimes, you can correct problems relating to
Communication Manager and HTTP communications by setting the HTTPPORT
value to 81.

4. If you want the deskphone to be IEEE-powered, verify with the LAN administrator

that IEEE power is indeed supported on the LAN.

Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G

August 2013 71

Содержание H.323 9621G































































































Результаты поиска

Содержание H.323 9621G

Отзывы:

Avaya H.323 9621G, Установка и обслуживание, Страница: 71 / 94

Результаты поиска

Содержание H.323 9621G

Отзывы: