Avaya H.323 9621G Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 94

Avaya H.323 9621G Скачать руководство пользователя страница 33

Note:

The SIG parameter value determines the signaling protocol whether H.323 or
SIP, and is used to determine the proper upgrade file that is downloaded. If you
set the SIG parameter manually using the local administrative Craft SIG
procedure, that value takes precedence over a SIG setting in a configuration file.
A change in the SIG value may require a reset to the deskphone so that a new
or different upgrade file can be downloaded to the deskphone.

11. While the upgrade script file is being downloaded, all IP deskphones display the

following message:

HTTP:

n sc etag

where

n

is the number of the IP address obtained from the HTTP server,

sc

is the

status code of the HTTP response, and

etag

is the value of the ETag header.

12. When the deskphone established the validity of the application file received, the

deskphone displays the following message:

File Obtained; please

wait......

s

secs

where

s

is the number of seconds that elapse while non-volatile memory is

erased.

13. While the application file is saved in flash memory, all IP deskphones display the

following message:

Saving to flash 1% 1 secs

where the percentage of the file and the number of elapsed seconds increase as
the application file is stored in flash memory.

14. The deskphone contacts the Avaya Media Server and displays one of the following

prompts for an extension:

Login

,

Enter Extension

, or

Enter Extension and

press Enter or OK

.

Steps to be performed by user after deskphone displays login and extension
prompts:

1. Enter a new extension and press

OK

. To register the deskphone without the

extension or password (unnamed), press only

OK

or make no entry and wait 60

seconds.

Note:

Unnamed registration is registering a deskphone with the call server without entry
of an extension or password. You must set the UNNAMEDSTAT parameter to
enable unnamed registration. Deskphones that are registered unnamed have
limited functionality. For more information, see

About unnamed registration

on

page 34.

All IP deskphones display one of the following messages:

Login

Enter Password

Understanding the plug in and reset process

Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G

August 2013 33

«
...
31
32
33
34
35
...
»

Содержание H.323 9621G































































































Отзывы:

Нет отзывов