Avaya ERS 5510 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 73

background image

Filt

Filters and QOS Configuration for Ethernet Routing Switch 5500

Technical Configuration Guide

27

January 2013

avaya.com

7. QoS Access Lists (ACL)

As of software release 5.0, the ERS 55xx can be configured using access lists  (ACL). You can choose to
use policies and/or ACLs to configure the ERS 5500 switch. Up to a maximum  of 15 precedence levels
are supported using policies whereas ACL‟s allows up to a maximum of 8 precedence levels.

Please be aware of the following when using ACLs:

By default, ACLs are always terminated

by an implicit action of “drop all non-matching traffic”. The

default action of “drop all non-matching traffic” cannot be changed.

ACL precedence is always in the order the ACLs are ent ered

ACLs are applied at a port level

Up to 8 precedence levels are supported, however, you can use A CL blocks if you have similar
filter rules - please see classifier block explanation in section 3. 2

When an A CL is assigned to a  port, the ACL is assigned the  highest precedence  value available
on the port. Each additional A CL that is added is then assigned decreasing precedence levels.
Any policies (QoS or non-QoS) already associated with  a port dictate the starting and subsequent
precedence  values for the ACL(s).

You cannot assign traffic mete rs

IP and L2 ACLs cannot be combined. If you wish to combine L2 and L3, policies must be used

ACLs cannot be modified; you must first remove the ACL-assign configuration at a port level, then
delete the ACL or ACLs you wish to modify and reconfigure the ACL or A CLs.

ACLs can be enabled or disabled. However, you cannot update or change the associated
precedence values when the ACL is disabled.

You can only configure ACLs using CLI or http (QoS Wizard). Although JDM will display the ACL
configuration, you cannot use JDM to either configure or

delete ACL‟s.

7.1 ACL Configuration

7.1.1 IP-ACL Configuration

IP ACLs are added using the following command:

5500 (config)#

qos ip-acl name <1..16 character string> ?

addr-type

Specify the address type (IPv4, IPv6) classifier criteria

block

Specify the label to identify access-list elements that are of

the same block

drop-action

Specify the drop action

ds-field

Specify the DSCP classifier criteria

dst-ip

Specify the destination IP classifier criteria

dst-port-min

Specify the L4 destination port minimum value classifier

criteria

flow-id

Specify the IPv6 flow identifier classifier criteria

next-header

Specify the IPv6 next header classifier criteria

protocol

Specify the IPv4 protocol classifier criteria

set-drop-prec

Specify the set drop precedence

src-ip

Specify the source IP classifier criteria

src-port-min

Specify the L4 source port minimum value classifier criteria

update-1p

Specify the update user priority

update-dscp

Specify the update DSCP

<cr>

«
...
25
26
27
28
29
...
»

Содержание ERS 5510










































































Отзывы:

Нет отзывов

Похожие инструкции для ERS 5510

Бренд: Barracuda Networks Страницы: 2

Бренд: Hama Страницы: 10

Бренд: Idis Страницы: 123

Бренд: Idis Страницы: 29

Бренд: Idis Страницы: 28

DirectIP DR-1304P

Бренд: Idis Страницы: 82

Бренд: iDirect Страницы: 130

Бренд: Pakedge Device & Software Страницы: 20

Бренд: Oracle Страницы: 24

Бренд: Justec Страницы: 61

Бренд: TP-Link Страницы: 110

Бренд: Supermicro Страницы: 27

Бренд: Solwise Страницы: 7

FrameSaver DSL 9788 Router

Бренд: Paradyne Страницы: 28

DynaGST/2402G GEP-33224T-1

Бренд: UNICOM Страницы: 17

Бренд: InHand Страницы: 69

Бренд: Inter-m Страницы: 20

Бренд: Allied Telesis Страницы: 136

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды