Avaya ERS 5510 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 73

background image

Filt

Filters and QOS Configuration for Ethernet Routing Switch 5500

Technical Configuration Guide

23

January 2013

avaya.com

in-profile-action-name
<WORD>

Specify the in-profile action name.

out-profile-action
<1,9-55000>

Specify the out-of-profile action ID; range is 1, 9 to 55000.

When configuring a meter, please note the following:

The maximum burst rat e cannot be configured the same as the committed or metered rat e. You
must always specify a higher maximum burst rate than the committed or metered rate

The maximum burst rat e and burst duration is used to calculate the bucket size or committed
burst in bytes

o

Duration = ((bucketSize*8) / (max-burst-rate

– committed-rate))

Bucket sizes in bytes are 4K, 8K, 16k, 32K, 64K, 128K, 256K, and 512K

For the 10 GigE module only, available for the Ethernet Routing Switch 5530, it supports bucket
sizes of 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K, 1024K, 2048K, 4096K, and 8192K.

If you do not specify maximum burst duration  when setting up a meter, the maximum bucket size
will be automatically set. For all 10/ 100 Mbps and 1 GigE ports,  the maximum  bucket size is 512K.
Also, it does not matter what  value you enter  for the maximum burst rate as long as it is larger
than the committed  rate.

Example:

Let‟s assume you wish to set the committed rate to 10M and set the committed burst (bucket size) to
128K. We also wish to mark all in profile traffic to Bronze and drop all out of profile traffic. To accomplish
this, please use the following commands:

1. Calculat e the duration, expressed in milliseconds.

Using the actual bucket size from table 7

and a maximum burst rate of 15M

Duration = ((bucketSize*8) / (max-burst-rate

– committed-rate))

Duration = ((131,072* 8) / (15,000,000

– 10,000,000))

Duration = 209.7152 ms

Rounded up, the duration value is 210 ms

2. Next, enter the following command on the Ethernet Switch 5500. Enter an in profile action id of 3 for

an in profile action of Bronze. Enter an out of profile action of 1 for an out of profile action of drop
traffic.

5530-24TFD(config)#

qos meter 1 name meter_1 committed-rate 10000 max-burst-rate

15000 max-burst-duration 210 in-profile-action 3 out-profile-action 1

3. Use the following command to view the meter just configured.

5530-24TFD(config)#

show qos meter

Id         Name       Commit   Commit    In-Profile      Out-Profile  Storage
                        Rate    Burst       Action          Action       Type
                       (Kbps)  (Bytes)

_____ _______________ ________ ________ _______________ _______________ ______
1     meter_1         10000    131072   Bronze_Service  Drop_Traffic    NonVol

4. Next, you will need to configure a policy and add this meter to the policy.

«
...
21
22
23
24
25
...
»

Содержание ERS 5510










































































Отзывы:

Нет отзывов

Похожие инструкции для ERS 5510

Бренд: CAME Страницы: 19

SISPM1040-582-LRT

Бренд: Lantronix Страницы: 2

Бренд: Lantronix Страницы: 7

Maestro E220 Series

Бренд: Lantronix Страницы: 25

Бренд: Ubiquiti Страницы: 22

UniFi UAP-AC-LR

Бренд: Ubiquiti Страницы: 28

Бренд: Lindy Страницы: 4

PG-FLEX RT FRL-752

Бренд: PairGain Страницы: 6

Бренд: Macsense Страницы: 39

Бренд: Caen Страницы: 14

Бренд: Kaptia Страницы: 14

Бренд: Z-Com Страницы: 18

Бренд: PRIZM Страницы: 8

CNGE28FX4TX24MS2

Бренд: Comnet Страницы: 154

Бренд: Inter-m Страницы: 20

Бренд: Belkin Страницы: 2

Бренд: Gigabyte Страницы: 10

Бренд: New Media Technology Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды