Avaya Cajun P880 Manager 5.1 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 62

Avaya Cajun P880 Manager 5.1 Скачать руководство пользователя страница 31

Cajun P550R/P880/P882 Switch Installation Guide

Unpacking and Installing

2-5

1.

Install the two rack mount flanges from the rack installation

kit to the sides of the switch (Figure 2-2).

* Note:

The screws and nuts needed to attach the rack mounting
flange to the rack are not supplied. It is recommended
you use at least four #10 pan head screws to attach the
bracket to the rack.

Figure 2-2. Rack Mounting the Switch

*Note:

The top edge of the rack mounting flange should

“split” the 1/2-inch spacing on the rack for proper
alignment and use of the rack space.

2.

Check that all of the pre-installed components are firmly
installed in the chassis. These include:

—

Modules

—

Power supply and fan assemblies

3.

Lift the system into position with one person on each end of
the switch.

4.

Check the rack and shelf to ensure they are square before
installing the chassis.

Switch Chassis

Flange

Rack Mounting

«
...
29
30
31
32
33
...
»

Содержание Cajun P880 Manager 5.1































































Отзывы:

Нет отзывов