Avaya Aura System Platform, Установка и настройка, Страница: 92 / 104

The system displays output similar to the one shown below:
13. Format the USB drive by typing the command
mkfs -t vfat /dev/sdb1
.
Setting up a USB drive
Prerequisites
The user is logged in as root and is currently in the
/root
directory.
Note:
If you are not familiar with Linux commands, Avaya recommends that you install System
Platform using a DVD.
1. Create a directory for the System Platform build by typing the following command:
mkdir /root/sp-builds
Note:
In this example, the directory
/root/sp-builds
is created and used.
2. Copy the ISO image to this directory.
3. Create a directory in
sp-builds
for temporarily mounting the ISO image by typing
the command
mkdir /root/sp-builds/isotemp
.
4. Mount the ISO image on your system by typing the following command:
mount -o loop /root/sp-builds/vsp-1.1.0.0.10.iso /root/sp-
builds/isotemp
5. Type the following command to copy the mounted directory (and the ISO image )
to another directory for running the script.
cp -r /root/sp-builds/isotemp /root/sp-builds/isocopy
Using USB drive for System Platform installation
92 Installing and Configuring Avaya Aura
™
System Platform April 2010