Avaya Aura System Platform Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 104

Avaya Aura System Platform Скачать руководство пользователя страница 16

S8510 Server

Avaya-provided equipment

Important:

Starting December 2009, Avaya would provide only S8800 Servers. S8510 would be

supported only for an upgrade operation.

Avaya provides the following equipment:

• Server and power cord
• Static rails rack kit, which contains

- One pair of static mounting rails with brackets
- One pair of chassis static rail modules
- 10–32 x 0.5–in. flange-head cross-head screws (Phillips head)
- Two, releasable tie wraps.

• Other hardware as ordered, such as a uninterruptible power supply (UPS).

Customer-provided equipment

The customer must provide the following equipment:

• Standard 19–in.4–post equipment rack properly installed and solidly secured. Rack must

meet the following standards:

- American National Standards Institute (ANSI) and Electronic Industries Association

(EIA) standard ANSI/EIA-310–D-92.

- International Electrotechnical Commission (IEC) 297.
- Deutsche Industrie Norm (DIN) 41494.

• Screws that come with the racks for installing the rails.
• USB keyboard, USB mouse, and monitor (optional for configuration).
• AC power from a nonswitched electrical outlet.
• Access to the customer's network.

Installation Prerequisites for System Platform

16 Installing and Configuring Avaya Aura

™

System Platform

April 2010

«
...
14
15
16
17
18
...
»

Содержание Aura System Platform









































































































Отзывы:

Нет отзывов