Avaya 4500 VA, Инструкция по установке и эксплуатации

Страница: 65 / 84

Communication
57
Avaya Model 6000 UPS Operator’s Manual
S
167-405-115 Issue 5 Uncontrolled Copy
Z > Set Baud Rate
allows you to select a new baud rate. The Select
Baud Rate Menu displays a list of baud rate options.
SELECT BAUD RATE
2 > 300
ENTER SELECTION >->
4
5
6
7
8
Q
>
>
>
>
>
>
1200
2400
4800
9600
19200
QUIT THIS MENU
5. To save the configuration settings, type
S
at the Main Menu
prompt. The UPS operates and communicates under the new
configuration, and defaults to these settings each time it is
started.
If you want to abandon the selections you have made, type Q to
quit.
NOTE Any changes you make to the UPS communications configuration must
correspond to the communications equipment you are using. In particular, new baud
rate selections for the UPS must match your communications equipment.
UPS Communications Interface Port
In addition to configuring the UPS for specific communication options,
you must also ensure proper use of the serial port when connecting the
UPS to your network or monitoring equipment.
NOTE Semiconductor switch contacts are rated at a maximum current of 50 mA and a
maximum of 40 Vdc.
Use only the pins specified for your communications configuration. The
use of any additional pins for any of the following interfaces can cause
interference with system communications.
Even though your network uses the specified signal lines, the pins
assigned to these signals at the network end of the cable may vary with
those of the UPS serial port. The connector body and style may vary as
well.