Avaya 3.7, Руководство по настройке

Страница: 62 / 326

Setting up the network
62 Avaya VPNmanager Configuration Guide Release 3.7
Associated IP Groups area. - This area lists the names of the IP groups associated with this
security gateway. You can select an IP group from the list and click Go to go to the IP Group tab
to view the group information.
For VSUs running VPNos 4.0 or earlier, the following additional information is shown.
Export Type. - Export type indicates the level of encryption used.
Serial Number - A unique number assigned during manufacturing for each security gateway.
The serial number can be viewed from the security gateway and modified through the
VPNmanager. When replacing a security gateway in an existing VPN configuration, use the
serial number edit button in the VPNmanager to modify the replacement security gateway’s
serial number. Modifying the security gateway’s serial number allows the flexibility to replace
devices while maintaining the configuration.
Flash Version. - Version of the currently executing NOS from one of two possible flash chips.
FIPS Mode. - Federal Information Processing Standards (FIPS) mode indicates if the security
gateway is running in the normal or FIPS Level 2 mode. It is recommended that this mode be
used only if an organization’s policy requires FIPS 140-1 Level 2 certification for cryptographic
devices.
The following are not supported in FIPS mode:
●
SKIP VPNs
●
VPNremote Clients
●
Any algorithm other than DES or 3DES,
●
Any authentication algorithm other than SHA-1.
RAS. - For VSU-100R only. This option is used when dial-in VPNremote users are going to
access a security gateway-100R. When enabled, this feature allows the security gateway-100R
to support remote clients using VPNremote remote access client software as shipped from the
factory. The feature is either enabled or disabled.
Memo tab
The Memo tab is used to record notes about the security gateway, such as change history,
physical location, firmware version, etc. This information is stored only in the database and is
not downloaded to the security gateway.
To create a memo:
1. From the Contents column, select the security gateway you want to configure.
2. Click the Memo tab to bring it to the front.