AVANT A36883, Руководство оператора для насадки

Страница: 16 / 40

16 (40)
.
5.2 Electric connection
Electric functions of the attachment:
The pump of the optional Water spraying system is electric. The electric water pump of the Water spraying
system can be controlled with the standard electric harness that is supplied with the attachment, or with the
Attachment control switch pack of the loader.
5.2.1 To connect the electric harness of the attachment to the loader
Starting form year 2016, there is an integrated electric plug in the multiconnector of the attachment. However,
a separate electric harness is also supplied with the attachment, to make it possible to connect and use the
attachment with loaders that are not equipped with Attachment control switch pack.
There are three ways to connect the electric connector, depending on the equipment on the loader and the
attachment:
1. If your loader is not equipped with the
attachment control switch pack:
Use the separate cable kit with a switch that is
supplied with the attachment. Connect this cable to
the 12 V electric socket near the operator's seat of
the loader, and to the electric plug of the
attachment.
1.
Electric plug, connects to the 12 V electric
socket near the operator's seat of the loader.
More information about the power outlet of
the loader can be found in the operator’s
manual of the loader.
2.
ON-OFF switch
Select the location of the switch in the cab so
that it is easily accessible but will not be used
inadvertently.
This cable with a switch can be used only to
control the rotation of the chute.
3.
Connect to the electric plug of the
attachment.
If the attachment is equipped with a electric
plug that is integrated to the multiconnector
of the attachment, disconnect the electric
cable from the multiconnector.
Cable harness A34731