AVANT A36883, Руководство оператора для насадки

Страница: 21 / 40

21 (40)
Operate the controls of the loader and its attachment in a careful and smooth manner, and avoid sharp turns
and sudden changes in speed or direction whenever using the collecting broom.
Direction of operation:
The broom is intended to rotate only to its
normal operating direction so that the
broom will function as collecting broom.
When moving the auxiliary hydraulics
control lever towards its locking position,
the broom will rotate as illustrated in the
adjacent figure.
To prevent damaging the bristles, do not drive with the loader keeping the broom on the
ground without rotating it.
Rotating speed:
Use high engine rpm for best collecting results. Depending on the loader model and drive speed, one or two
hydraulic pumps may be used. Note that unnecessarily high rotating speed will wear the broom down more
quickly, so the speed should be set according to operating conditions, material being handled, and the drive
speed.
Operate the attachment keeping the hydraulic flow within recommended range. Never
exceed maximum allowed input of hydraulic energy.