AVANT A36883, Руководство оператора для насадки, Страница: 28 / 40

28 (40)
.
6.10 Storing the attachment
Uncouple and store the attachment on level ground, but avoid leaving the attachment laying directly on the
bristles. The best way to store the attachment is a place where it is protected from direct sunlight, rain, and
extreme temperatures. Make sure that the attachment is secured against all movements during storage.
Never climb on the attachment.
The broom axle is connected in a way that allows it to move independently, so that there will always be correct
pressure on the broom. To prevent the constant pressure from permanently bending the bristles, the
attachment must be lifted up with the wheels. There are also adjustment brackets (2) on both sides of the
broom (1). Lock the broom by means of the the adjustment brackets into the uppermost position during
storage.
For longer storage periods lift the attachment upwards with the wheels in order to prevent bending of the
bristles, touch up the paint where needed, grease the lubrication points and oil the visible parts of the
hydraulic cylinder shaft to prevent rust damage.
6.11 Working on uneven ground
Extra caution is needed when using the equipment on inclined terrains and slopes. Drive slowly especially on
inclined, uneven, or slippery surfaces, and avoid sudden changes in speed or direction. Operate the controls
of the loader with careful and smooth movements. Watch out for ditches, holes on the ground, and other
obstacles, as hitting an obstacle may cause the loader to tip over.
Maximum lifting capacity can not be achieved on inclined terrain. On horizontally tilted terrain the load must
not be lifted high. The loader frame articulation should be kept straight when lifting heavy loads; turning the
load during lifting operation will affect the stability of the loader and may lead to overturning of the machine.