6
Administrator Number
The 8 administrator numbers can be programmed with a text command via SMS.
#TEL
[N]
=
XXXXXXXXXX
N stands for administrator number
1
–
8
(position)
XXXXXXXXXX stands for the phone number you want to program as administrator.
To add a number, the syntax of the command is the following:
#PWD123456#TEL1=3593334444
Please note that it is possible to program up to a maximum of 16 digits for a number.
To check all of the administrator numbers in the list:
#PWD123456#TEL?
Setting The Recipients That Receive Alert Message
The unit can only send text alerts to 1 or all 8 of the programmed administrators’ mobile
phone numbers and this function can be changed at any time by sending the following
commands by SMS message to the unit.
#RERN=
XXXXXXXX
XXXXXXXX stands for
8
digits value: ON (
1
) or OFF (
0
) for the 8 administrators
For example, if you assume only administrators 1, 2, 3, and 4 are to receive text alerts you
would send the following SMS message to the unit.
# PWD123456#RERN=11110000
Note:
You can only put 1 in the first 4 digits of the text command if there are only phone
numbers stored in
#TEL1
,
#TEL2
,
#TEL3
and
#TEL4
. The rest should be 0.
To check the setting of which recipient will receive alert messages
#PWD123456#RER?
EDITING THE INPUT ALERT MESSAGE
The Input Alert Message can be edited and programmed up to 100 characters long. You
can change the displayed text by sending the following commands by SMS message to the
unit.
#STR=
XXXXX…
XXXXX stands for the display text that you want to program
For example, if you want the alert message to display “
Garage Opened!
” when received a
text alert, you would send the following SMS message to the unit.
#PWD123456#STR =Garage Opened!