AUTOTERM PLANAR-2D-12/24, Руководство по установке

Страница: 24 / 29

24
3.9.6 Heater Electrical Wiring Installation.
Installation of wire harnesses and other electrical parts of
the heater should be made according to the wiring diagram. The
possibility of heating, deformation and movement of harnesses
during operation of the vehicle must be eliminated. Harnesses
are fastened to elements of the vehicle with plastic clips.
Attention! Mounting shall be carried out with the fuse
removed.
If the length of the fuel pump wiring harness needs
to be shortened, it is allowed to remove an
unnecessary portion from the middle of the
harness. The splice should be insulated.
Installation of the fuel pump electrical harness connector is
shown in Fig.27.